Regulateur II


The regulateur is the first reworked model of the new MILITARY 2 series that was designed by moVas watch Co. It takes the original regulateur design and modernises it with a reshaped midcase with shorter and more sculpted lugs and a 8 sided hex shaped bezel. Built in a surgical grade stainless steel case for robustness and with a hardened and aged dark grey DLC coating to replicate a vintaged military watch case, the case will look more aged as it is worn whereas the new hex bezel with deep brush finishing and polished edges will keep the watch looking modern creating a balanced modern classic.

Original concept of the watch is kept but with a deeper and more pronounced sandwich dial with C3 Superluminova for the indexes. Hands have been replaced with silver brush finished hands with C3 Superluminova for unparalleled lumination in the dark. There is also an option for rose gold plated and brushed hands to give a little bit more contrast to the watch. A matching Rose gold PVD signed rotor will also be used. The seperated hands synonymous with a regulateur watch allows for ease of telling time and the 10atm rating allows flexibility of usage, whether it be for a weekend getaway to your favourite beach hideaway or for a wedding reception. 50pc of the new Regulateur 2 has been produced.

Case: 316L Surgical Grade Stainless Steel with lightly brushed main case and brushed/ polished 8 sided hex shaped bezel. Case is 45mm across excluding crown guard 52mm lug hole- lug hole, 56.6 lug tip-tip. 15mm height to top of bezel/ 17mm height including raised dome sapphire.

Caseback: Exhibition thick caseback in 316L Surgical Grade Stainless Steel with brushed surface and mineral glass. Laser etched and numbered 01-50. 12 sided hex fully CNCed.

Glass: Sapphires 1) 3mm thick single 2mm high domed european sourced scratch resistant sapphire with slight pink/ blue hue with single Anti Reflective coating applied internally (pictured) or  2) 4.75mm tall, 3mm thick raised double dome colourless, scratch resistant tropic sapphire with single anti reflective coating applied internally (+USD100). Plexiglass 1) optical grade, distortion free 3mm thick low double domed german made acrylic 2) optical grade, distortion free 5mm thick tall double domed german made acrylic (+USD50)

Movement: Produced by Tianjin Seagull Watch Co. Ltd Caliber ST2708. 20 Jewels, beating at 21600bph, 42H Power Reserve,  featuring hour at 12 o’clock, minute at centre and seconds at 6 o-clock. Antishock protection system on balance wheel. ‘Magic lever’ allows for rotor to wind bi-directionally. Capable of auto winding and hand winding. Hackable

Dial: Matt Black, with C3 Superluminova lume sandwich dial construction and white printing.

Hands: Brass brushed silver plated hands with C3 Superluminova lume. Option of brushed rose gold hands (+USD20)

Strap: Option of 1) Black leather with white stitching (recommended and pictured), 2) Deep brown with white stitching (recommended and pictured), 3) Light tan with off white stitching leather, 4) Black leather with white stitching.

Buckle:  Based on strap option, 1) matching finished tang buckle Pre V Type #01 (recommended and pictured), 2) matching finished moVas Type #01 military plate buckle (recommended and pictured).

Crown: 10mm XL ratchet shaped crown with “V” logo deep etched with o-ring

Water Resistance: 10atm.

Power Reserve: 42 hours, fully wound.

Warranty: 2 years