The GMT diver has a storied past. It was never planned to be part of the diver range. When the original diver’s range was conceived, it featured the CAL2533 movement with linear power reserve, 24hr hand and sub second at 9H. Many customers had lamented the fact that we did not have a GMT version of the diver at that time so we obliged and hence the GMT diver was created.
With bracelet and choice of leather/ rubber strap (with tang buckle)-
Price for pickup in SINGAPORE: SGD$1320
Total Price with worldwide shipping: USD1060
Our customers also normally purchase the following (only applicable together with watch purchase):
Leather strap- SGD120/ USD100 (1 pair)
Double clasp deployant buckle – SGD60/ USD50 (+SGD6/ USD5 for black)
Additional fitted rubber strap- SGD60/ USD50
Additional Tang buckle- SGD35/ USD30 (1 pc) (+SGD6/ USD5 for black)
Additional 2pc hex screw and tube set- SGD25/ USD20 (1 set)
1) For local orders, send us an e-mail at firstname.lastname@example.org and inform us of the following:
– Model Name
– Strap choice (leather/ rubber and colour)
– Accesories (if any)
We will check availability and advise earliest collection time. Payment is with cash or bank transfer.
2) For worldwide orders, send us an e-mail and inform us of the following additional information:
– Paypal account e-mail (for us to send you an invoice)
We will check availability and advise accordingly. If available immediately we will send a paypal invoice to the supplied e-mail.
The original GMT Diver had the date corrector pusher on the case and crown guards like the rest of the diver range. It also featured a white date window as the movement used was unmodified. The GMT Diver is now in it’s third iteration. Gone are the crown guards and in it’s place is a large winding crown. The sandwich dial has also given way to an applied indices diving watch dial and a black date disc. The 24Hr/ GMT rehaut have larger numbers to increase legibility.
The usual dive watch specs are still covered, 120 click anti-clockwise unidirectional rotating bezel, C3 lume on hands and dial, anti-shock protection and large lume pip. Our dive watches have been tested to much greater depths due to double seals on ALL openings and includes a screw down crown.
Included with the watch and matching brushed bracelet is an additional strap. Please specify between rubber/ leather and the colour (chose from our strap). As shown in the pictures, we recommend a black rubber #02 strap with a Flush Type #02 buckle. Note that additional strap comes with a tang buckle and if you decide on the deployant buckle it is an additional charge as listed below.
The GMT3 Diver Big Crown illustrates how at moVas we are rarely satisfied with our designs and continually seek to improve them even if they are small and appear to be insignificant to most.
Case: 316L Surgical Grade Stainless Steel with deep shot peened surface. Case is 45mm across. 50mm lug hole- lug hole. 17mm height to top of bezel/ 19mm height including domed sapphire.
Caseback: Solid caseback in 316L Surgical Grade Stainless Steel with brushed surface. Deep etched with chinese character for “water”. Numbered 01-45. 12 sided hex edging.
Glass: 4mm thick single domed european sourced scratch resistant sapphire with slight pink/ blue hue. Single Anti Reflective coating applied internally
Movement: Cal 21-A Produced by Tianjin Seagull Watch Co. Ltd. based on TY2100. 26 Jewels, beating at 28800bph, 45H Power Reserve, featuring customised black date disc at 3H. Sandblasted and Gold PNP. Antishock protection system on balance wheel. Hackable.
Dial: Matt black painted, with grey/ white printing. Applied hour indices and matt black 24hr rehaut with white and red printing. C3 Superluminova lume on hour indices.
Hands: Brass hands plated silver, brushed with C3 Superluminova lume in centre. Matt black GMT hand outlined in red triangle with C3 Superluminova.
Strap/ Bracelet: Bracelet in 316L stainless steel fully brushed. Links are removable with 1.5mm hex screwdriver/ allen key (not provided) for length adjustment. Also provided is a choice of either our rubber or leather straps. Pictured is a Rubber 2 strap with Flush Type #02 buckle.
Buckle: Double locking diver’s buckle with diving suit extension is provided with the bracelet, shot brushed to match finishing on the bracelet, with micro adjustment on the side. Also provided for the rubber or leather strap is our Flush Type #2 buckle with matching shot peened surface.
Crown: Extra Large “V” logo deep etched crown with double locking screw down mechanism, profiled to match bezel grip.
Water Resistance: 30atm.
Power Reserve: 45 hours, fully wound.
Warranty: 2 year.