Case: 316L Surgical Grade Stainless Steel with brushed and polished surfaces with IP Black plating. Case is 45mm across excluding crown guard 53.5mm lug hole- lug hole, 59 lug tip-tip. 14.5mm height to top of bezel/ 18mm height including raised dome sapphire.

Caseback: Exhibition caseback with mineral glass in 316L Surgical Grade Stainless Steel with polished surface with IP Black plating. Laser etched and numbered 01-100. 6 square sloted.

Glass: Sapphires 1) 3mm thick single 2mm low domed european sourced scratch resistant sapphire with slight pink/ blue hue with single Anti Reflective coating applied internally (pictured) or  2) 4.75mm tall, 3mm thick raised double dome colourless, scratch resistant tropic sapphire with single anti reflective coating applied internally (as pictured. +USD100). Plexiglass 1) optical grade, distortion free 3mm thick low double domed german made acrylic or 2) optical grade, distortion free 5mm thick tall double domed german made acrylic (+USD50)

Movement: Produced by Shanghai Watch Co. Ltd Caliber 3LZF1. 34 Jewels, beating at 28800bph, 45H Power Reserve,  featuring Sub-sec at 9H, chrono min at 3H, chrono hour (12H) at 6H, time and chrono seconds at centre. Antishock protection system on balance wheel.

Dial: Carbon fiber dial with recessed and circular patterned subdials with chrome ring outline, printing in white and orange.

Hands: Brass skeleton hands painted white with regular white lume in centre and white edge.

Strap/ Bracelet:  Option of black silicon with white stitching, black rubber or leather strap (with orange stitching is recommended).

Buckle:  Based on strap option, matching finished tang buckle Pre V Type #01 recommended.

Crown: 10mm XL ratchet shaped crown with “V” logo deep etched with o-ring

Water Resistance: 10atm.

Power Reserve: 45 hours, fully wound.

Warranty: 2 year.

The chronograph heads the lineup of the Military range. It was designed as a sports dress watch with a fully functioning chronograph (stop watch). Built in a surgical grade stainless steel case for robustness and with a black IP coating. It is a modern watch inspired by modern day materials. It utilises carbon fiber for the dial and a choice of a silicon strap or leather strap. It was also designed with an oversized diamond shaped crown for ease of adjusting time. 10atm rating allows flexibility of usage, whether it be for a day behind the wheel of a plane or a sports car. 100pc of this design has been produced and each watch is numbered.

Powering the Chronograph is the Asian version of the venerable 7750 automatic chronograph movement. It is a cam actuated chronograph design with 3 registers at 9, 6 and 3 o’clock. 9 o’clock subdial indicates the running seconds, 3 shows elapsed minutes and 6 shows elapsed hour (12hrs). It is available with a standard raised sapphire or a raised domed colourless sapphire (pictured). Chronograph seconds are indicated by the seconds hand at centre. Pusher at 2 o’clock starts/ stops the chronograph and pusher at 4 o’clock resets it to zero.

The subdials are recessed and finished in a circular pattern with a polished silver ring around it’s perimeter to accentuate them. and give more texture to the dials. The exhibition caseback shows the signed and gold plated rotor that powers the automatic winding mechanism. Chose from a variety of available straps in silicon/ rubber or leather to complete the look of this modern masterpiece.