The Diver 2 Big Crown turns the clock back to when we first started making dive watches. The aim was to create a dive watch that could be used for actual diving. The criteria included a dial that was highly legible, the bezel had to be easy to grip especially with a diving glove, it had to be rated 300m water resistant and above all be robust so it could withstand the demands of an everyday diver.
These criteria are manifested in the Diver 2 by the tall, tri-part bezel, sandwiched C3 Superluminova dial and large C3 lume filled hands. Compared to the first generation divers, this iteration adds the Big Crown which can already be seen in most of our new divers. It is also the first time a C3 Superluminova sapphire glass timing bezel insert has been added.
With bracelet and fitted rubber strap (with diver type #01 buckle)-
Price for pickup in SINGAPORE: SGD$1320
Total Price with worldwide shipping: USD1060
Our customers also normally purchase the following (only applicable together with watch purchase):
Leather strap- SGD120/ USD100 (1 pair)
Double clasp deployant buckle – SGD60/ USD50 (+SGD6/ USD5 for black)
Additional fitted rubber strap- SGD60/ USD50
Additional Tang buckle- SGD35/ USD30 (1 pc) (+SGD6/ USD5 for black)
Additional 2pc hex screw and tube set- SGD25/ USD20 (1 set)
1) For local orders, send us an e-mail at firstname.lastname@example.org and inform us of the following:
– Model Name
– Strap choice (leather/ rubber and colour)
– Accesories (if any)
We will check availability and advise earliest collection time. Payment is with cash or bank transfer.
2) For worldwide orders, send us an e-mail and inform us of the following additional information:
– Paypal account e-mail (for us to send you an invoice)
We will check availability and advise accordingly. If available immediately we will send a paypal invoice to the supplied e-mail.
The bezel is constructed of 3 separate parts which allow it to be polished and brushed in different locations so it achieves more shine. The bezel is also intentionally designed to be 6mm high for ease of handling with gloves and creates a sunken pothole effect for the dial and hands. This effect is further enhanced by the sandwiched dial which sinks even further into the watch giving it additional depth. The swooping down lugs are a hallmark of our diver series and hug the wrist better to make for a much better fitting watch for smaller wrists. The entire case has been deep brushed to give the watch a more rugged finish externally while the internal rehaut has been high polished (which is rarely seen due to the amount of work needed) to mirror the elements of the dial which creates more animation and play internally.
The usual dive watch specifications are covered; 120 click anti-clockwise unidirectional rotating bezel, C3 lume on hands, dial and sapphire bezel and anti-shock protection. Our dive watches have been tested to much greater depths due to double seals on ALL openings and include a screw down crown. Only 45 hand made and finished pieces are available.
Included with the watch and matching brushed bracelet is a fitted rubber strap paired with diving extension fitted deployment buckles. If you do not wish to receive the standard bracelet or rubber strap, please specify between rubber/ leather straps and colour (chose from our strap) you prefer. Note that additional strap comes with a tang buckle and if you decide on the deployment buckle it is an additional charge as listed below.
The Diver 2 Big Crown is a progression albeit in small increments and illustrates that at moVas we are rarely satisfied with our designs and continually seek to improve them even if they are minute details and appear to be insignificant to most.
Case: 316L Surgical Grade Stainless Steel with deep brushed surface. Case 45mm across. 50mm lug hole- lug hole. 17mm height to top of bezel/ 19mm height including domed sapphire.
Caseback: Solid caseback in 316L Surgical Grade Stainless Steel with brushed surface. Deep etched with chinese character for “water”. Numbered 01-45. 12 sided hex edging.
Glass: 4mm thick single domed european sourced scratch resistant sapphire with slight pink/ blue hue. Single Anti Reflective coating applied internally
Movement: Produced by Tianjin Seagull Watch Co. Ltd. Caliber 2100. 26 Jewels, beating at 28800bph, 45H Power Reserve, featuring customised date disc at 6H, customised day disc at 3H. Day disc in English and Chinese characters. Customised rotor in black PVD and signed. Main plates perlaged. Antishock protection system on balance wheel. Hackable.
Dial: Matt black painted, with white printing. Sandwiched dial with C3 Superluminova lume filled hour batons.
Hands: Brass hands plated silver, light sandblasted with C3 Superluminova lume in centre.
Strap/ Bracelet: Bracelet in 316L stainless steel fully brushed. Links are removable with 1.5mm hex screwdriver/ allen key (not provided) for length adjustment. Also provided is a fitted rubber strap with a diver extension deployment buckle.
Buckle: Double locking diver’s buckle with diving suit extension is provided with the bracelet, brushed to match finishing on the bracelet, with micro adjustment on the side. Also provided for the rubber is brushed Diver type #01 deployment.
Crown: Extra Large “V” logo deep etched crown with double locking screw down mechanism, profiled to match bezel grip.
Water Resistance: 30atm.
Power Reserve: 45 hours, fully wound.
Warranty: 2 year.